NAD C 368 Hybrid Digital DAC Amplifier

Model: C 368
  • Description
  • Specifications
  • With the C 368 Hybrid Digital DAC Amplifier, your home audio system will never fall behind the pack. Thanks to our MDC technology, the C 368 is easily customisable and ready for all future features and upgrades. 

    80W x 2 Continuous power into 8 or 4 Ohms:
    Bluetooth A2DP with aptX supported
    MM Phono input:
    Analogue line inputs
    SPDIF coax and optical inputs:
    Speaker A, Speaker B
    Stereo or Bridge mode configuration:
    Preamp/Subwoofer out
    Headphone amplifier:
    MDC Slots for future upgrades
    IR Remote:
    Smartphone Control App
    12V Trigger in/out:
    IR in/out
    RS-232 Serial port for control:
    Control4, Crestron, RTI, URC, AMX, Savant, Elan certified

    Line Input, Pre Out
    THD (20Hz-20kHz):
    <0.005% at 2V out
    Signal/Noise Ratio:
    >106dB (IHF; A-weighted, ref. 500mV out, unity gain)
    Channel Separation:
    >80dB (1kHz); >70dB (10kHz)
    Input Impedance (R and C):
    22 kilohm + 100pF

    Maximum Input Signal:
    >4.5Vrms (ref. 0.1% THD)
    Output Impedance:
    Source Z + 240 Ohm
    Input Sensitivity:
    93mV (ref. 500mV out, Volume maximum)
    Frequency Response:
    ±0.03dB (20Hz-20kHz)
    Maximum voltage output – IHF load:
    >4.5V (ref. 0.1% THD)

    Tone Controls
    ±7.0dB at 20kHz
    ±7.0dB at 60Hz

    Phono Input, Pre Out
    THD (20Hz-20kHz):
    <0.01% at 2V out
    Signal to Noise Ratio
    >84dB (200 Ohm source; A-weighted, ref. 500mV out)
    >76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out)

    Input Sensitivity:
    1.44mV (ref. 500mV out, Volume maximum)
    Frequency Response:
    ±0.3dB (20Hz-20kHz)
    Maximum Input Signal at 1kHz:
    >80mVrms (ref. 0.1% THD)

    Line Input, Headphone Out
    THD (20Hz-20kHz):
    <0.005% at 1V out
    Signal/Noise Ratio: >110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain)
    Frequency Response:
    ±0.3dB (20Hz-20kHz)
    Channel Separation:
    >60dB at 1kHz
    Output Impedance:
    6 Ohms

    Continuous Output Power into 4 Ohms and 8 Ohms (Stereo):
    >80W (ref. 20-20kHz at rated THD, both channels driven)
    Continuous Output Power into 8 Ohms (Bridge Mode):
    300W (at 20-20kHz at THD 0.03%)
    THD (20Hz-20kHz):
    <0.03% (250mW to 80W, 8 Ohms and 4 Ohms)
    Signal to Noise Ratio:
    >98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)
    Clipping Power:
    >95W (at 1kHz 0.1% THD)
    Clipping Power (Bridge Mode)
    : >315W (at 1kHz 0.1% THD)

    IHF Dynamic Power
    8 Ohms 120W
    4 Ohms 200W
    2 Ohms 250W
    IHF Dynamic Power (Bridge Mode)
    8 Ohms 500W
    4 Ohms 560W

    Peak Output Current:
    >20A (in 1 Ohm, 1ms)
    Damping Factor:
    >300 (ref. 8 Ohms, 20Hz and 6.5kHz)
    Frequency Response:
    ±0.3dB (20Hz-20kHz)

    Channel Separation
    >75dB (1kHz)
    >70dB (10kHz)

    Input Sensitivity (for 80W in 8 Ohms)Line In:
    Digital In:
    21% FSSample Rateup to 24 bit/192kHz
    Frequency Band:
    Maximum Transmit Power (dBm):
    7dBm ±2dBm

    at Auto Standby ON and Network Standby OFF:
    0.5 Watts*
    at Auto Standby ON and Network Standby ON:
    1.2 Watts**
    OFF mode (Power switched OFF):
    0.1 Watts

    Gross Dimensions (W x H x D):
    435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)”
    Net Weight:
    7.8kg (17.2lb)
    Shipping Weight:
    10.1kg (22.3lb)


Have a Question?

Be the first to ask a question about this.

Ask a Question

You recently viewed

Clear recently viewed