NAD Integrated Amplifier with pre installed MDC BluOS

Model: C388BluOS
  • Description
  • Features
  • Specifications
  • Looking ahead to the future has always been a major factor when it comes to the creation of our products. With the C 368 Hybrid Digital DAC Amplifier, your home audio system will never fall behind the pack. Thanks to our MDC technology, the C 368 is easily customisable and ready for all future features and upgrades. With the optional BluOS module, the C 368 can connect to your network and be controlled through a smartphone, tablet, or desktop, and connect wirelessly to any other BluOS-enabled device to create a multi-room High Resolution Audio system. You can also instantly connect to the C 368 through Bluetooth, giving you the ability to stream wirelessly from any Bluetooth-enabled device, and if you’re a vinyl fan, you can also add a turntable. Enjoying music has never been so easy. A totally modern approach to amplification, the C 368 is the ultimate amp for any music lover’s system.

  • Getting it Right
    When it comes time to create a product, we never overlook the most crucial of requirements. From low noise circuits to precise volume control action, to accurate channel balance and proper input and output impedance characteristics, we here at NAD do everything we can to get these things exactly right. We also include an MM Phono stage with precisely accurate RIAA equalization, high overload margins, extremely low noise, and an innovative circuit to suppress infrasonic noise that is present on all LPs – all without affecting bass response. Our line inputs can accommodate all kinds of analogue source components by offering ideal input impedance characteristics with linear ultra-low-noise buffer amplifiers to prevent any sonic degradation caused by inappropriate loading of the source device. We include a separate headphone amplifier with low output impedance and very high output voltage capability – enough to drive even high impedance studio monitor headphones. Low impedance line outputs that can connect to subwoofers extend the versatility of this well thought out amplifier. These are all details you can hear.

    Using a customized version of the proven Hypex UcD output stage, the C 368 allows for massive power with nearly unmeasurable distortion and noise in the audible range. Every detail of this design has been carefully planned and perfectly executed to produce every last drop of performance.


    80W x 2 Continuous power into 8 or 4 Ohms

    Bluetooth A2DP with aptX supported
    MM Phono input Analogue line inputs
    SPDIF coax and optical inputs Speaker A, Speaker B
    Stereo or Bridge mode configuration Preamp/Subwoofer out
    Headphone amplifier MDC Slots for future upgrades
    IR Remote Smartphone Control App
    12V Trigger in/out IR in/out
    RS-232 Serial port for control Control4, Crestron, RTI, URC, AMX, Savant, Elan certified



    Continuous Output Power into 4 Ω and 8 Ω (Stereo)

    >80W (at rated THD, 20-20kHz, both channels driven)
    Continuous Output Power into 8 Ω (Bridge Mode) 300W (at 20-20kHz, at THD 0.03%)
    IHF Dynamic Power 2 Ω 250W
    4 Ω 200W
    8 Ω 120W
    IHF Dynamic Power (Bridge Mode) 4 Ω 560W
    8 Ω 500W
    THD (20Hz – 20kHz <0.03% (250mW to 80W, 8 ohm and 4 ohm)
    Signal/Noise Ratio >98dB (A-weighted, 500mV input ref. 1W out in 8 Ω)
    Clipping Power >95W (at 1kHz 0.1% THD)
    Clipping Power (Bridge Mode) >315W (at 1 kHz 0.1% THD)
    Clipping Power (Bridge Mode) >315W (at 1 kHz 0.1% THD)
    Damping Factor >300 (ref. 8 Ω, 20Hz and 6.5kHz)
    Frequency Response ±0.3dB (20Hz-6.5kHz)
    Channel Separation >75dB (1kHz)
    >70dB (10kHz)
    Sample Rate 192kHz/24bit
    Dimensions (W x H x D) 435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)”
    Net Weight 7.8kg (17.2lb)
    Shipping Weight 10.1kg (22.3lb)


Have a Question?

Be the first to ask a question about this.

Ask a Question

You recently viewed

Clear recently viewed